IEC 60309 power, delivered finished
Pin and sleeve connectors, interlocked receptacles, finished cable assemblies and the distribution boxes that feed them. Most 30, 60 and 100 A drops in a North American data center end in an IEC 60309 device, and Walther builds the whole run from the plug to the box above the rack, with the assemblies built in Somerset, New Jersey.
Dynamic is the Walther rep for Northern California and Northern Nevada, working with the electrical contractors building data centers, the distributors who stock for them, and the engineers who write the drop schedule.
Cross-reference a part numberSend us your drop schedule
What Walther builds
Four families carry the line. Everything else is one row at the bottom.
IEC 60309 pin and sleeve devices
Plugs, connectors, receptacles and appliance inlets from 20 to 100 A. The housing color marks the voltage and the ground pin's clock position keys it, so a 480 V plug cannot mate with a 208 V receptacle.
- IP44 splash-proof or IP67 watertight
- Dual rated UL and CSA
- Tested to the IEC 60309-1 clauses: 1,000 cycles under load, 3,000 V dielectric, -25 to +90 °C, eight drops from 75 cm
- Mates with any conforming IEC 60309 device already installed
Mechanical interlocks
The receptacle and the switch built as one part. The plug cannot go in or come out while the circuit is live, and the switch locks out in the off position, so connect, disconnect and lockout happen at one device.
- IP67 NEMA 4X and IP44 versions
- Versions with a breaker where the branch needs its own protection
- For maintenance receptacles, test benches, washdown floors and shop drops
Cable assemblies and power drops
The plug, the cable and the termination arrive as one finished assembly built to the drop schedule: plug on end 1, termination on end 2, cable type and length. Listed as an assembly, so the listing rides with the drop and not just the parts.
- Power drops and whips at 30, 60 and 100 A
- Cordsets and conduit assemblies from 6 to 100 ft
- 20 and 30 A Y-splitters
- Built in Somerset, New Jersey
Power distribution units
Distribution that brings 30, 60 and 100 A to the point of use. The rack distribution box sits above the rack and splits one 60 A feed into three 30 A outputs. Portable boxes carry internal breaker protection, and custom boxes are built to spec.
- Rack distribution box, 60 A in and three 30 A out, in a metal enclosure above the rack
- Portable distribution with internal breakers for shops, sites and events
- Custom distribution built to your one-line
