Power it
One degree, held, without a click
Solid state relays for dialysis and incubator heating, autoclaves and analyzer thermal blocks, switching at the zero cross fast enough to hold a zone within a degree, with no contact to wear and no click in the room. PCB-mount and four-leg relays, EMC-optimized versions, and relays that report their own load status, from the range Celduc lists for EN 60601-1 equipment.
Beds, chairs and doors, sensed without a moving switch
Magnetic proximity and reed sensors for door and position detection on a medical refrigerator, a bed or an analyzer drawer: sealed, nothing to wear on the outside, stainless versions for the wet bench. Multi-motor PCB relays for the bed and the chair from the same catalog.
Clean AC, galvanically separated
TDS and TDX converters deliver single or three-phase AC with galvanic separation from the mains, the supply for metrology, laser and lab loads that should not see the building's noise; 3 kVrms isolation is standard across the line. A DC UPS with Ethernet reporting keeps the controller through a dip. From a shop with 900 custom designs behind it.
Connect, disconnect, lock out: one part
The receptacle and the switch are one unit at the skid, the autoclave or the bench: the circuit cannot be made or broken under load, and the handle takes a lock, IP67 where the water hits. Distribution assemblies with breaker protection built in, one feed to the bench row. Series II pin and sleeve, 20 to 100 A, UL Listed and CSA Certified together.
Control it
Keyboards that survive the disinfectant
Glass capacitive keyboards with a flat, smooth surface that takes a twice-daily disinfectant wipe at a pharmacy counter, sealed keyboards to IP68, washable silicone keyboards, touchless optical switches. InduSmart panel PCs with an IP65 front and an NFC reader for operator login and traceability.
The skid panel
iSmart smart relays and XGB PLCs with license-free programming for the skid and the utility panel, Jaguar drives for the pumps and the air handler, UL-approved miniature circuit breakers, RCBOs and surge protection for the auxiliary circuits, iView HMIs on the door. Same-day dispatch from US stock.
Prove it
Ethernet inside the instrument
Board-level switching the size of a paperclip, designed into the enclosure instead of bolted on. One OEM built it into a flow controller for wafer-fab gas delivery: 113,000 power cycles, zero failures, and a ten-year availability commitment behind the part number.
Instruments onto the network; LabVIEW keeps working
Ethernet-to-serial units install as a local COM port, so LabVIEW, MATLAB and the VIs you already have keep working when the instrument moves from the bench PC to the network. RTD and thermocouple modules put bath and block temperatures on the same network.
Cameras and sensors on one cable
PoE gigabit switches on the DIN rail power the inspection cameras and sensors from the switch port: one cable per device, no AC adapters in the vision cabinet and one fewer supply to qualify. Remote I/O beside it presents states and counts as Modbus TCP without touching the qualified controller.
Sags recorded, not remembered
PRO Series: a Class 0.2S revenue meter and a Class A Edition 3.1 power quality analyzer in one instrument. Sags, swells, interruptions and unbalance logged with their time and depth, so the analyzer that dropped out at 03:10 has a cause on file. AC and DC on the same platform, DC to 1,500 V.
Foundation
Cable entry for the GMP machine
KES entries in signal blue with an elastomer built to FDA food-contact requirements, a flat visible face with no dirt pockets, up to 32 conductors sealed to IP66, for the pharmaceutical and packaging machine.
Validated cable, connectors on
KDS split entry passes a pre-terminated, tested cable through the enclosure wall with the connector on, sealed to IP66, so the harness that was qualified is the harness that ships. WISKA glands and junction boxes for the utility rooms.
