Smart relay to drive, one ecosystem
Smart relays, PLCs, HMIs, variable speed drives, contactors and UL 489 breakers from one manufacturer. The iSmart, i3 and XGB controllers share license-free programming software, and IMO ships from US stock.
Dynamic is the IMO Automation rep for Northern California and Northern Nevada. We work with the machine builders, panel shops and integrators who decide what runs the machine.
See the product familiesTell us what the panel has to run
What IMO makes
Eight families. Every rating is the factory's figure for the part, confirmed on the datasheet at quote time.
Jaguar NXG variable speed drives
The Jaguar NXG is the IMO variable speed drive for the motor loads on a machine. Jaguar drives come in compact to heavy frames, including harsh-environment models built for vibration. Contactors and motor circuit breakers for the drive come from the same catalog.
- Compact to heavy frames
- Harsh-environment models built for vibration
- Pumps, fans and conveyors
i3 intelligent controllers
The i3 is the IMO intelligent controller, the step between an iSmart smart relay and an XGB PLC. The i3 uses the same license-free programming as the smart relay and the PLC.
- License-free programming
- Same toolchain as iSmart and XGB
- No runtime license
iSmart smart relays and XGB PLCs
IMO iSmart smart relays handle interlocks, start sequences and timers. XGB PLCs take over once the I/O count climbs or the sequence needs expansion. License-free programming runs across the range, so the step up does not change the toolchain or add a runtime license.
- Smart relays for small sequences
- PLCs for higher I/O counts
- No per-seat fee for the programming software
iView HMIs
IMO iView operator interfaces sit on the same ecosystem as the logic. The HMI on the door comes from the same catalog as the smart relay, the PLC and the drive.
- On the same ecosystem as the logic
- One supplier for the logic, the drive and the HMI
UL 489 miniature circuit breakers
IMO Automation miniature circuit breakers are UL 489 listed. A UL 489 listed breaker is the branch-circuit protective device a panel inspector expects on each branch. A supplementary protector is not a substitute for a UL 489 breaker.
- UL 489 listed for the branch circuit
- Motor circuit breakers from the same catalog
- One vendor and one curve family
Contactors, RCBOs and surge protection
IMO contactors run from compact through heavy industrial frames, with a 3 W sealed coil that runs cool. Motor circuit breakers, RCBOs and surge protection sit beside the contactors in the same catalog. Cam switches and pilot lights complete the panel.
- 3 W sealed coil
- Compact through heavy industrial frames
- Up to a 5-year warranty on electromechanical components
Disconnects and DC isolators
IMO mechanical disconnects isolate the AC supply at the panel. The SI Series TRUE DC isolator (UL 508, 8 million units installed since 2009) goes where a PV string or a DC feeder needs a disconnect you can see and lock. The SIM compact version is about a third smaller for the combiner.
- Mechanical AC disconnects
- SI Series TRUE DC isolator, UL 508
- SIM compact version for the combiner
Signal conditioning
Loop-powered isolators, signal converters and frequency-to-analog converters keep analog signals clean in noisy environments.
- Loop-powered isolators
- Signal converters
- Frequency-to-analog converters
IMO backs electromechanical components with up to a 5-year warranty and dispatches from US stock the same day.
Specs and datasheets at IMO Automation
