Opens mobile navigation.
The new OVX-6400 is a 6400VA 3-phase sine wave DC/AC inverter that meets EN612587-1 and EN50155 standards among others. The OVX-6400 is designed not only to work within the 400 to 900V input voltage range but also to withstand surges and over-voltages as described in EN50124-2.
The unit allows:
- Adjustable output frequency
- Adjustable output voltage
- Input voltage according to EN50163:2006 & EN50124-2:2017
- High input-output isolation 5400Vrms
- Remote off optocoupler
- Alarm by isolated relay contacts
- Configurable input: Reverse or Mid power
- Remote control via RS232
- CAN BUS
- Railway applications according to EN61287-1
- Fire and smoke: EN45545-2
The ODX-6000 industrial and railway inverters use silicon carbide (SiC), a technology that offers high density and up to 94.3% efficiency. The unit can operate at high temperature, high power and high frequency. Avoiding potential energy loss is key, and this new series of 6000W pure sine wave 3ph DC/AC inverters are also a guarantee of maximum optimization of the electrical flow.
The unit allows:
- Up to 5 units working in parallel (30kW).
- Changing the output voltage and frequency.
- Start-up the motors by a soft start based on voltage/frequency ramp up.
- Modify the slope of the start-up ramp and have a remote control via RS-232.
- Set the rotation speed of a motor according to the appropriate voltage/frequency ratio.
- Activate shutdown by applying voltage output.
- Setting and monitoring the status of the input and output voltage through a user friendly software interface.
The ODX-4500 three-phase sinusoidal DC/AC inverters series offers up to 4500VA. It has a soft start and is programmable via RS232. These inverters are ready to work under harsh conditions thanks to their robustness and reliability.
The unit allows:
- Sine wave output voltage
- Suitable for motors control
- Selectable output frequency: 50/60Hz
- Adjustable output voltage
- High input-output isolation 3000Vrms
- Remote inhibit
- Reverse phase
- Remote control via RS232
- Alarm by isolated relay contacts
- Remote off opto-coupled
- Optional railway version EN50155
- Fire and smoke: EN45545-2 approved
- Efficiency up to 93%
- The ODX-1300 are three-phase sinusoidal DC/AC inverters that offer 1300VA with multiple input-output combinations.
- All models have been designed to feed industrial equipment and are suitable for motor control and offer a version for railway applications that comply with EN50155.
- The ODX-1300 inverters have a maximum output current protection and feature a disable function for input under-voltage.
- Parameters can be monitored and adjusted through the PAMTool application via RS232 and the efficiency of this series goes up to 91%.
The ODX-3000 is a three phase 3000VA DC/AC inverter available both for a wide range of industrial and railway applications (under 50155 standard). It offers true sine wave output voltage, high power density and it is suitable to work under harsh environment conditions while optimizing efficiency.
The ODX-3000 series delivers up to 3000W at 230Vac and 400Vac and offers a great variety of input-output combinations while not compromising performance. It has been designed for chassis mounting and a rackmount kit is available as well. Cooling takes place through an internal fan and the series offers up to 92% efficiency. Parameters can be set and monitored via RS232 through the PAM Tool available with all models.
- The ODS-1500 is a series of single-phase sinusoidal DC/AC inverters that offer up to 1500W of active power with adjustable output voltage and frequency and input voltage range from 12Vdc to 110Vdc, allowing many possible input-output combinations.
- The output voltage can be monitored and adjusted along with other parameters via RS232 through an application available with all models.
- All ODS-1500 DC/AC inverters have been designed for industrial applications that require a robust and compact design and versions are available to comply with the EN50155 standard for rolling stock, with a tropicalized circuit and improved robustness.
- This inverter has been designed for chassis mounting and a rackmount kit is available as well. Cooling takes place through an internal fan and models offer up to 91% efficiency.
- The ODS-750 is a sine wave, single-phase DC/AC inverter. The series offers 450W-750W power and is available with 120Vac or 230Vac output and a wide range of input voltages (12, 24, 36, 48, 72, and 110Vdc).
- With a robust design, it fits in a wide range of industrial applications that require high reliability with a compact design. A version for railway applications is also available for all models, which comply with EN50155 and RIA12.
- The ODS-750 DC/AC has M3 threaded holes for chassis mounting in different positions, DIN rail or subrack mounting. The equipment is protected against reverse polarity, maximum average power and maximum peak current. It also shuts down when the operation curve limit is exceeded for over 1 second.
The OPS-260 inverter arrives to offer maximum performance with a high degree of protection (IP66). Safe and reliable, the new model complies with the IP66 normative protection in order to offer ruggerized resistance. The OPS-260 consists of sine-wave 120Vac or 230Vac output voltage DC/AC converters.
Main features:
- Sine wave output voltage
- 50-60Hz output frequency
- Convection cooling
- IP66 protection
- Output failure alarm
- Remote inhibit
- High input-output isolation 3000Vrms
- Railway version EN50155
- Fire and smoke: EN45545-2 approved
- OCS-260 inside
A High power Railway & Industrial 260VA DC/AC Inverter, the OCS-260 series is composed of sinusoidal inverters of up to 260VA apparent power and is presented in a very compact format. We have the rail version (EN50155) and offer multiple mounting options.
KEY FEATURES
-
Sine wave output voltage
-
Selectable output frequency: 50/60Hz
-
Adjustable output voltage
-
Output failure alarm
-
Remote inhibit
-
High input-output isolation 3000Vrms
-
Optional railway version EN50155
-
Fire and smoke: EN45545-2 approved
-
Efficiency up to 90%
ACB-3000 is a power transfer switch converter with 2 sine voltage input lines able to switch between the lines and give a secure output in case of failure in one of the input lines. The device has been designed to give extra protection against failure in one of the input lines for mainly auxiliary loads in railway and industrial applications.
Key Features:
-
Suitable for series: ODS-750, ODS-1500 and ODS-3000.
-
Available for both 120V and 230V versions
-
2ms high speed failure detection and transfer time, which goes unnoticed for the vast majority of AC loads.
-
Does not require a synchronised network.
The ACI-3000 is an inrush current limiter with active protection against reverse polarity available as a complimentary accessory for Premium PSU’s DC/AC inverter series: ODS-1500, ODS-3000 and ODX-3000. It can also completely stop the inverter via the ON/OFF input so that only a very small standby current remains.
Key Features
Remote ON/OFF with low standby current
Active polarity reversal protection
According to EN-50155
According to EN-45545
Active polarity reversal protection
According to EN-50155
According to EN-45545
Speak with a Product Expert.
