The Titan Model 595, 90-Degree Tapered Chain-Driven Live Roller Conveyor is one of a kind for heavy-duty pallet handling.
The large diameter tapered rollers (4 1/4" diameter on the big end and 2-1/2" diameter on the small end) permit the pallets to keep their appropriate orientation as they move around the curve.
The Model 595's 7 gauge welded side frame and double #50 chain (side bow) roll-to-roll drive allow it to resist rigorous industrial use.
Efficient conveying widths can be customized according to your specific needs. Learn more
MODEL 535 CHAIN-DRIVEN LIVE ROLLER CONVEYOR
The Model 535 is the best in heavy-duty conveying for pallets, skids, and drums, as it is intended to accommodate extremely heavy loads.
Rollers with a 3-1/2" diameter and a.300" wall thickness (scheduled 80 pipes) are rated for 2,500 pounds per roller.
Heavy-duty industrial grease-sealed 1-1/16" hex bore bearings are utilized in the rollers.
The standard construction frame is 6 inches wide and 8.2 pounds in weight.
Roller centers are 6 inches for chain drive #60 and 6-7/16 inches for chain drive #80. Learn more
MODEL 526 CHAIN-DRIVEN LIVE ROLLER CONVEYOR
The Titan Conveyors Model 526 Chain Driven Live Roller conveyor is designed to transport heavy loads such as pallets, skids, and drums.
The unit is equipped with a number 50 chain and a roll-to-roll drive.
The chain guard is a one-piece, 7-gauge structure that is integral to the frame. On 2-13/16′′, 3-7/16′′, 4-3/8′′, 5′′, 5-15/16′′, and 10′′ centers, the rollers have a 2-5/8′′ diameter and 7 gauge (capacity of 600 lb).
Typical floor supports are adjustable for up to 30 inches to the top of the roller.
The Model 526 is available in custom lengths with a minimum length of 4 feet. Learn more
Model 519 Chain Driven Live Roller Conveyor is intended for medium-duty loads such as boxes, lightweight pallets, and drums.
The unit is equipped with a #40 chain and a roll-to-roll drive of increased sturdiness.
The frame is manufactured from formed 10-gauge metal.
The normal drive for 60 FPM roller speed is a half-horsepower motor.
There is a vast selection of possible standard effective widths. 4", 6", 8", and 12" are the standard roller spacings.
The Type 519 has a minimum length of 4 feet and can be purchased in a variety of lengths to fulfill specific needs. Learn more
When your conveyor system calls for a cost-effective 90-degree curve, specify the Model 490 V-belt Driven Live Roller Curve.
The Model 490 transmits power to the drive rollers using a durable, industrial-grade continuous V-belt.
Rollers with a diameter of 1.9 inches and a gauge of 16 are supplied as standard.
The Model 490 is offered in a variety of between-frame widths. There are also tapered rollers available. Learn more
The Model 402 Belt Driven Live Roller Conveyor should be used when your application requires light-duty conveying of tiny goods or closed roller centers.
The 1-3/8" diameter rollers can be supplied on 1-1/2" centers, making them ideal for packages as short as 5".
The basic 1-3/8-inch-diameter rollers include an 18-gauge shaft with a 5/16-inch hex spring and grease-packed bearings.
The drive pulley has a 1-3/16" bore and a 4" crown face with rubber lugs.
Although the rollers are deemed light-duty, the frame's robust 12 gauge construction can handle the majority of industrial applications. Learn more
A motor-free conveying choice, gravity roller conveyors require either manpower or a modest slope for maximum function. They are a terrific and inexpensive transmitting choice across sectors. Learn more
The Zone Accumulation Conveyors are intended to gather items and containers into zones without contact, a process frequently referred to as "Zero Pressure Accumulation" or "ZPA." Plug-and-play logic makes control simple and reduces costs. Titan offers designs suitable for all roller conveyor models and varieties.
The Type ZPA is intended for handling heavy loads such as pallets, skids, and drums. More zone lengths than the standard 60" are available. Rollers are 2 1/2" diameter x 11 gauge or an alternative 2 5/8" x 7 gauge. 5 inches is the standard roller spacing; however, different choices are available. Accumulation and load release can be set as either single or slug typed when ordered. Learn more
The Model 108 Slider Bed belt conveyor is the machine you should choose if your requirements demand for a durable, industrially engineered device.
Type 108 has a durable 8" driving pulley with rubber lugs. Learn more
The Model 104 Slider Bed Belt is created using a systems-based methodology.
The square head and tail end connectors and the standard 4-inch deep formed frame provide you the ability to integrate this unit with other types to ensure a continuous material flow.
Standard design characteristics include screw-type take-ups and 4-inch-diameter crown-face pulleys. Learn more
Consider utilizing the Model 105 Roller Bed Belt Conveyor when the application needs the use of rollers to reduce friction.
The shape of the roller bed allows you to transport greater goods than a normal slider bed.
Model 105 Roller Bed Belt Conveyors utilize 4-inch diameter pulleys (lagged drive), 1.9-inch diameter x 16 gauge rollers, and a 7/16-inch hex axle.
The standard roller center distance is 6 inches, although this can be altered to suit the purpose. Learn more
The Model 118 troughed belt conveyor is a cost-effective, medium-duty conveyor for bulk materials.
The conventional 4-inch deep, 12-gauge frame provides for a reduction in total weight while still providing the rigidity required for medium-duty applications.
Its model's superior construction makes it perfect for hauling loose pieces or big items. Bottom, center, and top drives are offered. Learn more
Consider implementing the Model 208 Floor to Floor Slider Bed conveyor in your system if a tough industrial material handling system is required.
The 8-inch-diameter, rubber-flanged (vulcanized) driving pulley provides additional capability for larger loads and longer inclines.
The optional 3-inch long power feeder gives versatility to your product's in-line flow.
The conventional twin nose over is adjustable to a maximum angle of 30 degrees. Learn more
Consider employing the Model 310 horizontal/incline belt conveyor if handling your parts economically necessitates an unconventional technique.
The Model 310 is available in a variety of belt widths with horizontal and incline lengths according to your precise specifications.
The basic belt is a black PVC belt with 1-1/2" rubber cleats on 12" centers.
Optionally, the Model 310 can be equipped with a 10"-diameter undercarriage configuration with 10"-diameter wheels for portability. Electrical controls are available as optional equipment. Learn more
The Model 102 Mini-Pro Conveyor was created to tackle scrap handling issues from under your dies.
The Mini-1-1/2" Pro's low profile frame fits comfortably under most die parallels, allowing for rapid removal of trash or finished parts.
A 2" diameter knurled drive pulley ensures positive belt tension under severely greasy situations. Mini-narrow Pro's frame width (belt width plus 1/2′′) is unmatched among conveyors of this type.
A bottom-mounted drive is conventional, whereas a top-mounted drive configuration is optional.
Typical belt widths range from 2 to 24 inches, while normal lengths range from 4 to 10 feet. Learn more
When your application requires a conveyor with a horizontal portion, incline section, and horizontal layout, but a steel belt cannot be used, the Model 340 Sidewall Conveyor is the ideal solution.
The sidewall belt is used to transport a wide range of materials, including bulk powders, components, and abrasive lumpy material.
The unit is offered in a variety of belt widths, incline degrees, straight section lengths, sidewall heights, cleat heights, and cleat centers. Learn more
STEEL BELT CONVEYORS
When your application requires a heavy-duty conveyor, use the Model 640, 4-Inch Pitch Hinged Steel Belt Conveyor.
With a 10 gauge apron, 7 gauge outside sidebars (standard), cast iron flanged rollers, and a 3/4" through tube with a 1/2" pin, the maximum allowed belt draw increases to 6,000 pounds (twice the 2-1/2" Pitch).
The Model 640's architecture consists of a 10-gauge, 15-inch-deep frame with a liquid-tight or open bottom pan.
Standard curves are available in angles of 300, 450, and 600 degrees. The Model 640 is offered in widths ranging from 6 to 60 inches. Learn more
The Model 670 Drag Chain Conveyor is appropriate for materials that would cause a Hinged Belt unit to clog, such as cast iron, fine chips, scrap, or sludge.
The Model 670 is offered in conventional belt widths ranging from 4 to 24 inches, with additional width options of 30, 36, and 42 inches.
The 2-1/2" pitch chain is available with drag flights welded on 12-1/2" centers and in 30, 45, and 60-degree curves.
The location of the drive, the horsepower, the constant and variable speed controls, the color scheme, and the supports can also be tailored to your specifications. Learn more
Model 696 Slat Conveyors should be considered when your material handling needs necessitate an innovative solution.
Standard construction (a 7 gauge frame) is exceptionally durable and exceeds the most stringent industrial usage requirements. Units are available with either a 4" or 6" pitch heavy-duty slat conveyor chain with attachments at every pitch.
Slats are available in a conventional formed 7 gauge design, but they can also be supplied in alternative designs, such as formed V, heavy flat plate, attachments for lugs or fittings, or even different materials, such as wood.
Slat conveyors can be used for transportation, accumulation, assembly, side loading and unloading, and applications requiring repeated stops and starts. Learn more
Wire mesh belt conveyors can be utilized in a number of scenarios to convey hot, cold, or greasy products in an oven, for cooling, transporting cold items from a freezer, transporting hot food items, and in other unique circumstances.
The roller bed deck is utilized for transporting heavy cargo over long distances, whilst the longitudinal deck features an open design to improve airflow.
The basic belt consists of 1/2 inch by 1 inch galvanized flat wire mesh with a crimped selvage edge.
Wire mesh belting is perfect for transporting heated, washed, dried, or cleaned components. Belt widths of 12", 18", 24", 30", and 36" are typical. Learn more
SPECIALTY CONVEYORS AND ANCILLARY EQUIPMENT
When cooling hot parts or drying damp parts requires an expert partner. Common applications include foundry and forge operations in which components heated to temperatures of several thousand degrees Fahrenheit must be carried with care as they cool down. Most cooling conveyors feature drives that work at a very slow pace and have variable control in order to achieve the desired exit temperature.
There is a multitude of styles, sizes, and speeds of cooling fans available for both single-phase and three-phase power supplies.
The fans can be housed in any building imaginable, ranging from highly open to closed tunnels. Depending on the application, a variety of belts are available, including plastic mesh modular belts, high-temperature alloy oven belts, and stainless steel belts. Learn more
Carbon steel from The BTT model of ball transfer tables permits product rotation in any direction.
Merchandise may be manually rotated to any needed angle with minimal effort. Each ball has a weight capacity of 50 pounds.
The balls can be arranged in either square or stacked centers. Typical centers are 3 inches and 6 inches. The BTT model is available for pop-up transfers. Learn more
Consider utilizing a Powered Turntable when your plant layout necessitates a direction change in the shortest space possible within your conveyor system.
The turntable conveyor can be utilized for product separation, accumulation, and direction adjustments. The Turntable is available in diameters ranging from two to twelve feet.
The typical tabletop is constructed of 7 gauge steel and supported by angle iron.
The top is either driven by a chain and sprockets or an air-operated cylinder. All four sides of the unit are protected by expanding metal guards.
The unit is available with a chain and sprocket drive, air operation for 90-degree rotation, or no drive for manual indexing.
Depending on the application, a gravity roller or chain-driven live roller conveyor can be installed on the top. Learn more
The Quench Conveyor is intended for quenching or cooling heavy-duty parts, die-cast parts, and scrap.
It is constructed using a horizontal, liquid-tight tank.
It's available with wire mesh, plastic, or steel belt. Select from an extensive selection of liquid-tight conveyors for your die casting, heat transfer, part cooling, and coating operations.
The Quench Conveyor is meant to be a comprehensive system for liquid quenching and cleaning items.
Quench conveyors are ideal for applications where air cooling is impractical or insufficient. Learn more
The Model 680 Multi–strand Chain Conveyor is designed to transport products that cannot be moved by a regular roller conveyor.
It boasts a sturdy 7 gauge steel construction frame and a typical double pitch chain with a 2,400-pound weight capacity.
The unit contains a 230/460/3/60, 1 horsepower drive with a chain speed of 30 feet per minute. Optional equipment includes a second, heavier double-pitch roller chain with a maximum load capacity of 4,000 pounds, as well as a low-profile drive.
Perfect for hefty unit loads.
Ideal for products with uncommon properties, such as hefty tote pans or pallets. Learn more
With the Conveyors Model 350 Pro-Feed Parts Conveyor, you can conveniently and reliably transport practically any kind of component.
The configurable hopper enables you to drop parts, walk away, and let the "Pro Feed" handle the rest; continuous feed or on-demand feeding to a bowl feeder. Learn more
Attachment timing belt conveyor ZRF-P 2040 is specifically developed for product indexing applications requiring a cleated or fixed belt.
This conveyor is perfect for situations requiring precise product positioning. Based on the product and the intended use, there are custom fixtures available.
This is a conveyor with precise movement. Learn more
Can I help YOU?
We are here to Assist ...
If you can't find what you need, please don't hesitate to contact me.