Opens mobile navigation.
-
The cable gland system from WISKA includes components made of polyamide, brass, and stainless steel.
-
Different variations of cap nuts and fittings can be combined with a wide range of sealing inserts.
-
By this, SPRINT® cable glands, besides standard applications, also meet special requirements such as low temperatures, EMC, pressure equalization, or explosion-proof safety with IP 68/69K.
-
Wiska venting glands and plugs for your enclosure pressure equalization needs.
-
Condensation forms in well-sealed housings when there is a pressure difference along with a temperature change causing condensation to build on the inside of the enclosure.
-
Wiska venting glands and plugs allow for the equalization of pressure to prevent condensation build up inside the enclosure.
-
Venting product is most well used in enclosures with electronics that generate higher amounts of heat which are prone to condensation with outside temperature changes.
-
Wiska venting glands allow for strain relief and IP protection on a cable entering the enclosure as well as pressure equalization preventing water and dust ingress as well as condensation build-up.
-
Save time on your electrical installation using COMBI junction boxes.
-
Combi boxes are designed with a membrane over the entries which allows for cable routing with minimal tools.
-
The plastic construction is rust proof and captive cover screws eliminate the need for additional hardware. All this in a package that is minimum IP66 rated.
-
Certain Combi sizes are also threaded allowing for the use of a cable gland which will achieve an IP67 rating and removal of the membrane entry is as simple as just installing the cable gland to the threaded hole.
Speak with a Product Expert.
